hoopie

How to Transfer Embroidery Patterns onto Fabric: 6 Methods

Six easy ways to transfer an embroidery pattern onto fabric: tracing on a window or phone, water-soluble pens, transfer paper, stabiliser and iron-on pens.

By Ayoub Farid · · 2 min read

Before you can stitch a design, you need it on your fabric. The best method depends on your fabric colour and thickness. Here are six ways, from easiest to most specialised.

1. Tracing with light (window or screen)

Best for: light, thin fabrics.

  1. Print the pattern, or open it on a tablet or phone at full brightness.
  2. Tape it to a sunny window (or lay the fabric over the screen).
  3. Lay your fabric on top and trace with a washable pen.

Hoopie has a "Trace this pattern" mode that shows the lesson's design full-screen at true size, so you can hold your fabric over your phone and trace.

2. Water-soluble pen

Best for: light fabrics, any design. The ink disappears with water. Draw freehand or trace. Test on a scrap first, and don't iron over the lines before washing, as heat can set them.

3. Heat-erasable (friction) pen

The lines disappear with heat from an iron or hair dryer. Convenient, but lines can come back faintly in the cold and sometimes leave a ghost on dark fabrics. Test first.

4. Carbon / transfer paper

Best for: thicker fabrics where you can't see through. Place the dressmaker's transfer paper (ink side down) on the fabric, the pattern on top, and trace firmly with a pen or stylus.

5. Water-soluble stabiliser

Best for: dark fabrics, towels, knits and thick fabrics.

  1. Print or trace the pattern onto sticky water-soluble stabiliser.
  2. Stick it on the fabric and stitch through both layers.
  3. Rinse in water; the stabiliser dissolves.

6. Iron-on transfer pens or pencils

Trace the design in reverse on paper with a transfer pen, then iron it onto the fabric. The lines are permanent, so you must cover them completely with stitches.

Which method for which fabric?

FabricBest method
White or light cottonLight tracing + water-soluble pen
Thick light fabricTransfer paper
Dark fabricWhite transfer pencil, or water-soluble stabiliser
T-shirt / knitWater-soluble stabiliser
TowelWater-soluble stabiliser on top
DenimStabiliser or white pencil (how to embroider denim)

Tips

  • Draw thin lines. Thick lines are harder to cover.
  • Mark only what you need. For seed stitch fills, just mark the outline.
  • Size it right for your hoop before you trace (embroidery hoop sizes).

Looking for designs to transfer? See easy embroidery patterns for beginners.

Frequently asked questions

What is the easiest way to transfer an embroidery pattern?

Tracing onto light fabric using a window or a bright screen and a water-soluble pen.

How do I transfer a pattern to dark fabric?

Use a white transfer pencil or chalk pen, or print the pattern onto water-soluble stabiliser.

Will a water-soluble pen wash out?

Yes, with cold water. Avoid ironing over the lines before you wash them out.

Can I trace a pattern from my phone?

Yes. Set the screen to full brightness, lay thin fabric over it and trace gently.

Keep reading